Transient-state operation of an anoxic biotrickling filter for H₂S removal

The application of an anoxic biotrickling filter (BTF) for H₂S removal from contaminated gas streams is a promising technology for simultaneous H₂S and NO₃^- removal. Three transient-state conditions, i.e. different liquid flow rates, wet-dry bed operations and H₂S shock loads, were applied to a laboratory-scale anoxic BTF. In addition, bioaugmentation of the BTF with a H₂S removing-strain, Paracoccus MAL 1HM19, to enhance the biomass stability was investigated. Liquid flow rates (120, 60 and 30 L d^-1) affected the pH and NO₃^- removal efficiency (RE) in the liquid phase. Wet-dry bed operations at 2-2 h and 24-24 h reduced the H₂S elimination capacity (EC) by 60-80%, while the operations at 1-1 h and 12-12 h had a lower effect on the BTF performance. When the BTF was subjected to H₂S shock loads by instantly increasing the gas flow rate (from 60 to 200 L h^-1) and H₂S inlet concentration (from 112 (± 15) to 947 (± 151) ppm_v), the BTF still showed a good H₂S RE (>93%, EC of 37.8 g S m^-3 h^-1). Bioaugmentation with Paracoccus MAL 1HM19 enhanced the oxidation of the accumulated S⁰ to sulfate in the anoxic BTF.