Related Experiment Video

Updated: Jan 23, 2026

The Fabrication and Operation of a Continuous Flow, Micro-Electroporation System with Permeabilization Detection
10:34

The Fabrication and Operation of a Continuous Flow, Micro-Electroporation System with Permeabilization Detection

Published on: January 7, 2022

3.3K

Continuous flow microfluidic cell inactivation with the use of insulating micropillars for multiple electroporation

Sanam Pudasaini1, A T K Perera2, Dhiman Das3

  • 1School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore.

Electrophoresis
|June 10, 2019
PubMed

Keywords:
Cell InactivationElectroporationMicrofluidics

More Related Videos

Neonatal Subventricular Zone Electroporation08:06

Neonatal Subventricular Zone Electroporation

Published on: February 11, 2013

13.3K
Platelet Adhesion and Aggregation Under Flow using Microfluidic Flow Cells10:10

Platelet Adhesion and Aggregation Under Flow using Microfluidic Flow Cells

Published on: October 27, 2009

18.6K

Related Concept Videos

X-Inactivation01:58

X-Inactivation

The human X chromosome contains over ten times the number of genes as in the Y chromosome. Since males have only one X chromosome, and females have two, one might expect females to produce twice as many of the proteins, with undesirable results.
41.7K
Hybrid Zones02:29

Hybrid Zones

Hybrid zones are narrow regions where two closely related species interact, mate, and produce hybrids. Relative to either parent species, hybrids may possess distinct phenotypic or genetic differences that impact their survival and reproductive success. The genetic variances introduced by hybridization influence species diversity and speciation processes within the hybrid zone.
21.8K
Insulation Coordination01:23

Insulation Coordination

Insulation coordination is the process of matching electric equipment's insulation strength with protective device characteristics to protect the equipment against expected overvoltages. This selection is based on engineering judgment and cost. Equipment can generally withstand short-duration high transient overvoltages, but repeated tests with identical waveforms can yield inconsistent results. As a result, standard impulse voltage waveforms are used for testing, defined by specific times...
559
Conductors and Insulators01:19

Conductors and Insulators

Some materials may easily let electrical charges pass through them, while others obstruct their flow. The former are called conductors and the latter insulators. The atomic structures of materials determine whether they are conductors or insulators of electricity.
Most metals are conductors. Their atomic configuration is such that one or more electron(s) are loosely bound to the nucleus in each atom. Thus, a sea of mobile electrons are available in them, known as free electrons. Their easy...
10.6K
Thermal Insulation in Masonry Walls01:22

Thermal Insulation in Masonry Walls

In hot, dry climates, the thermal mass of masonry walls can be beneficial, absorbing heat during the day and releasing it at night, thereby stabilizing indoor temperatures. However, in most other climates, additional insulation is necessary to enhance thermal resistance.
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
510
Zones of Protection01:16

Zones of Protection

In power systems, the entire setup is divided into protective zones to isolate faults and protect the rest of the network. These zones include generators, transformers, buses, transmission lines, distribution lines, and motors. Each zone can be visualized as a separate room in a house, with each room protected by its own circuit breaker.
Protective zones are defined by closed dashed lines, containing one or more components. A key characteristic of these zones is the strategic placement of...
779