Related Experiment Video
Updated: Jan 23, 2026
Pool-Boiling Heat-Transfer Enhancement on Cylindrical Surfaces with Hybrid Wettable Patterns
Published on: April 10, 2017
Effect of foamability on pool boiling critical heat flux with nanofluids
Md Qaisar Raza1, Nirbhay Kumar1, Rishi Raj1
1Thermal and Fluid Transport Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Patna, Bihar 801103, India. rraj@iitp.ac.in.
Abstract:
Foaming, which is of significant importance to many industrial processes, is attributed to the reduced coalescence of bubbles due to the presence of stabilizing/foaming agents such as surfactants and nanoparticles. While foams have been extensively investigated for their rheological properties, their impact on the critical heat flux (CHF) during boiling is not well understood. The technical benefits of CHF enhancement with nanofluids are lost when surfactants are added to improve their stability. The actual mechanism of this decrease is unresolved, and thermal engineers are forced to look for alternative CHF enhancement solutions. Here, we showed that nucleating bubbles formed vapor-foam and crowded the heater surface to inhibit rewetting. Less frequent rewetting forces premature dryout, which is primarily responsible for the reported CHF deterioration. In this regime, strong foaming agents such as SDS mask the effect of nanoparticles on CHF. Using these insights, we presented a master curve that captured the effect of foamability on CHF and could be used to predict the value of CHF solely based on the foamability of the solution. We further showed that the CHF mechanism switched from the foamability regime to the conventional wettability regime upon lowering the surfactant concentration and/or with weakly foaming surfactants. In such cases, an increase in the nanoparticle concentration successfully increased CHF. We believe that the important clarifications regarding the CHF mechanism with nanofluids and the master curve of CHF versus foamability presented in this study will facilitate the design of energy-efficient boiling systems.
Related Concept Videos
03:12Freezing Point Depression and Boiling Point Elevation
The boiling point of a liquid is the temperature at which its vapor pressure is equal to ambient atmospheric pressure. Since the vapor pressure of a solution is lowered due to the presence of nonvolatile solutes, it stands to reason that the solution’s boiling point will subsequently be increased. Vapor pressure increases with temperature, and so a solution will require a higher temperature than will pure solvent to achieve any given vapor pressure, including one...
02:34Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility
Temporary attractive forces like dispersion are present in all molecules, whether they are polar or nonpolar. They...
02:44Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
01:16Critical Region, Critical Values and Significance Level
In hypothesis testing, a sample statistic is converted to a test statistic using z, t, or chi-square distribution. A critical region is an area under the curve in probability distributions demarcated by the critical value. When the test statistic falls in this region, it suggests that the null hypothesis must be rejected. As this region contains all those values of the...
01:15Electric Flux
02:46Quantifying Heat