Related Experiment Video
Updated: Jan 22, 2026

Estimating Sediment Denitrification Rates Using Cores and N2O Microsensors
Published on: December 6, 2018
Nitrogen removal from wastewater via simultaneous nitrification and denitrification using a biological folded
Mingdong Chang1, Youzhao Wang1, Yuan Pan1
1School of Mechanical Engineering and Automation, Northeastern University, 3-11, Wenhua Road, Heping District, Shenyang 110819, China.
Abstract:
A conventional biological filter has been shown to be a viable method for removing nitrogenous compounds from wastewater, but it still has many disadvantages. In this study, a biological folded non-aerated filter (BFNAF) was designed, and its feasibility for nitrogen-loaded wastewater treatment has been confirmed. Effects of the HRT and the COD/N ratio on the performance of BFNAF were investigated. Through response surface method, when the COD/N ratio and the HRT were 5.39 and 10.83 h, removal efficiencies of NH4+, COD and TN reached maximum values of 88.62 ± 0.81%, 76.12 ± 0.57%, and 50.48 ± 1.02%, respectively. In addition, it was found that several denitrifying bacteria, such as Azoarcus, Arcobacter, Flavobacterium, along with many ammonia-oxidizing bacteria and nitrite-oxidizing bacteria, co-existed in the community of the biofilm. All the results showed that the BFNAF could realize the simultaneous nitrification and denitrification (SND) process effectively.
More Related Videos
09:49Use of a Battery of Chemical and Ecotoxicological Methods for the Assessment of the Efficacy of Wastewater Treatment Processes to Remove Estrogenic Potency
Published on: September 11, 2016
05:40Comparison of Scale in a Photosynthetic Reactor System for Algal Remediation of Wastewater
Published on: March 6, 2017
Related Concept Videos
The Nitrogen Cycle
Protein Folding
Protein Folding
Protein Structure Is Critical to Its Biological Function
Proteins perform a wide range of biological functions such as catalyzing chemical reactions, providing...
Molecular Chaperones and Protein Folding
The...
Passive Filters
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...
Active Filters