Related Experiment Video
Updated: Jan 21, 2026

An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature
Published on: September 23, 2018
Analysis of Microstructure and Electric Conductivity in Al-RE Alloy by Heat-Treatment Condition
Hyo-Sang Yoo1, Yong-Ho Kim1, Kyu-Seok Lee1
1EV Components & Materials R&D Group, Korea Institute of Industrial Technology, 1110-9 Oryong-dong, Buk-gu, Gwangju, 61012, Republic of Korea.
Abstract:
In this study, we investigate the microstructure and mechanical properties of as-extruded Al-1.0RE alloys. The molten Aluminum alloy was maintained at 800 °C and then poured into a mould at 200 °C. Aluminum alloys were hot-extruded into a rod measuring 12 mm thick with a reduction ratio of 38:1. The microstructure and electric conductivity properties of as-extruded Al-1.0RE alloy under different annealing processes were investigated and compared. After extrusion, the intermetallic compound having a needle shape in the cast state was finely decomposed based on the direction of extrusion. Significant changes in the microstructure were detected after annealing at 500 °C with fragmentation and sphering of eutectic particles. The annealing temperature of Al-1.0RE alloy increased proportionally to the electrical conductivity. The formation of Al-RE intermetallic compounds increases the electrical conductivity and improves the mechanical properties of the alloy through precipitation hardening.
Related Concept Videos
Electrical Conductivity
In a practical conductor, an applied electric field may be sustained, causing a flow of electrons, which produce a current. The differential form of the current, the current density, is related to the electric field.
More generally, it is related to the force per unit charge, which involves the...
Electric Field of Parallel Conducting Plates
Consider a cross-section of a thin, infinite conducting plate having a positive charge. For such a large thin plate, as the thickness of the plate tends to zero, the positive charges lie on the plate's two large faces. Without an external electric field, the...
Quantifying Heat
Specific Heat
For example, increasing the temperature of one gram of water by 1°C requires one calorie of heat energy and can be written as 1 cal/g-°C, or...
Heat Flow and Specific Heat
Conduct Disorder

