Related Experiment Video

Updated: Jan 21, 2026

Measurement of Dynamic Force Acted on Water Strider Leg Jumping Upward by the PVDF Film Sensor
07:17

Measurement of Dynamic Force Acted on Water Strider Leg Jumping Upward by the PVDF Film Sensor

Published on: August 3, 2018

6.4K

A Force-Sensor-Based Method to Eliminate Deformation of Large Crankshafts during Measurements of Their Geometric

Krzysztof Nozdrzykowski1, Leszek Chybowski2

  • 1Institute of Basic Technical Sciences, Faculty of Marine Engineering, Maritime University of Szczecin, Willowa 2-4, 71-650 Szczecin, Poland.

Sensors (Basel, Switzerland)
|August 14, 2019
PubMed

Keywords:
active measurement systemelimination of deformationforce sensorgeometry measurementslarge-size crankshaftsmetrology

More Related Videos

Measuring Deformability and Red Cell Heterogeneity in Blood by Ektacytometry09:12

Measuring Deformability and Red Cell Heterogeneity in Blood by Ektacytometry

Published on: January 12, 2018

15.4K
Measuring the Interaction Force Between a Droplet and a Super-hydrophobic Substrate by the Optical Lever Method07:18

Measuring the Interaction Force Between a Droplet and a Super-hydrophobic Substrate by the Optical Lever Method

Published on: June 14, 2019

7.1K

Related Concept Videos

Geometric Mean01:15

Geometric Mean

The mean is a measure of the central tendency of a data set. In some data sets, the data is inherently multiplicative, and the arithmetic mean is not useful. For example, the human population multiplies with time, and so does the credit amount of financial investment, as the interest compounds over successive time intervals.
In cases of multiplicative data, the geometric mean is used for statistical analysis. First, the product of all the elements is taken. Then, if there are n elements in the...
3.9K
Plastic Deformations01:19

Plastic Deformations

Plastic deformation represents a fundamental concept in materials science, which explains the irreversible change in the shape of a material when it experiences stress beyond its elastic capability. This phenomenon is important in structural engineering, especially in designing and analyzing cantilever beams—structures that are securely fixed at one end and bear loads at the opposite end. When these beams are subjected to loads within their elastic range, they will return to their...
436
Plastic Deformations01:14

Plastic Deformations

It is essential to understand how structural members behave under plastic deformation when the bending stress exceeds the material's yield strength. This state of deformation permanently alters the shape of the member, in contrast to the linear elastic behavior observed before yielding. The strain at any point in the member is expressed in terms of maximum strain. Notably, the neutral axis, which coincides with the centroid during elastic bending, shifts away from the centroid under plastic...
407
Temperature Dependent Deformation01:12

Temperature Dependent Deformation

In a nonhomogeneous rod made up of steel and brass, restrained at both ends and subjected to a temperature change, several steps are involved in calculating the stress and compressive load. Due to the problem's static indeterminacy, one end support is disconnected, allowing the rod to experience the temperature change freely. Next, an unknown force is applied at the free end, triggering deformations in the rod's steel and brass portions. These deformations are then calculated and added...
369
Deformations in a Symmetric Member in Bending01:18

Deformations in a Symmetric Member in Bending

When analyzing the deformation of a symmetric prismatic member subjected to bending by equal and opposite couples, it becomes clear that as the member bends, the originally straight lines on its wider faces curve into circular arcs, with a constant radius centered at a point known as Point C. This phenomenon helps to understand the stress and strain distribution within the member more clearly.
When the member is segmented into tiny cubic elements, it is observed that the primary stress...
480
Kinetics of Drug Elimination01:17

Kinetics of Drug Elimination

Eliminating drugs from the body is a vital process that occurs through excretion or metabolism. Understanding the kinetics of drug elimination is crucial for drug development, dosage determination, and optimizing patient outcomes.
Drug clearance depends on the rate of drug elimination and its plasma concentration. Another important parameter is the half-life of a drug, which is the time required for its concentration to decrease by half. In most cases, drug clearance follows first-order...
4.1K