Related Experiment Video
Updated: Jan 20, 2026
Chemical Reactions in Aqueous Solutions
Selective Recovery of n-Butanol from Aqueous Solutions with Functionalized Poly(epoxide ionic liquid)-Based
Tianyi Tang1, Tong Ling1, Mengfei Xu1
1Department of Chemical Engineering, School of Chemistry and Chemical Engineering, Nanjing University, 163 Xianlin Avenue, Nanjing 210023, PR China.
Abstract:
In this study, hydroxyl-terminated polybutadiene-poly(epoxide ionic liquid)-poly(urethane urea) (HTPB-PEIL-PU) membranes, HTPB-PEIL1-PU and HTPB-PEIL2-PU, were prepared by the reaction of functionalized PEIL, poly(1-methylimidazole-3-methyl-ethyloxy)hexafluorophosphate or poly(1-methylimidazole-3-methyl-ethyloxy)bistrifluoromethanesulfonimidate, respectively, with HTPB using 4,4'-diphenylmethane diisocyanate (MDI) as the chain extender. The HTPB-PEIL-PU and HTPB membranes were investigated for the selective recovery of n-butanol from aqueous solutions by pervaporation. PEIL was confirmed to be successfully embedded in the PU membranes by 1H NMR, Fourier transform infrared, and differential scanning calorimetry measurements. According to our mechanical measurements, the HTPB-PEIL-PU membranes retain the mechanical properties of the original PU membrane. PEIL was shown to enhance the diffusion rate of n-butanol significantly based on swelling behavior tests. The pervaporation flux through the HTPB-PEIL1-PU membrane increased with increasing feed temperature and feed concentration. In contrast, the separation factor of the HTPB-PEIL1-PU membrane increased with increasing feed temperature but decreased with increasing feed concentration. In addition, the HTPB-PEIL2-PU membrane exhibited an optimal separation factor of up to 29.2 at a feed concentration of 3% and a feed temperature of 70 °C, which is superior to that (22.7) through pure HTPB membranes. Furthermore, the HTPB-PEIL1-PU and HTPB-PEIL2-PU membranes show better long-term stability than other supported ionic liquid membranes.
Related Concept Videos
03:03Chemical Reactions in Aqueous Solutions
02:42Aqueous Solutions and Heats of Hydration
When ionic compounds dissolve in water, the ions in the solid separate and disperse uniformly throughout the solution because water molecules surround and solvate the ions, reducing the strong electrostatic forces between them. This process...
07:14Synthesis of Bimetallic Pt/Sn-based Nanoparticles in Ionic Liquids
02:11Leveling Effect and Non-Aqueous Acid-Base Solutions
The Leveling Effect of a Solvent
A generic acid (HA) reacts with the generic base (B-) to yield the corresponding conjugate base (A-) and conjugate acid (HB):
07:30Determining the Mass Percent Composition in an Aqueous Solution
Determining the composition of a solution is an important analytical and forensic technique. When solutions are made with water, they are referred to as being aqueous, or containing water. The primary component of a solution is referred to as the solvent, and the dissolved minor component is called the solute. The solute is dissolved in the solvent to make a solution. Water is the most common...
11:04Synthesis of Ionic Liquid Based Electrolytes, Assembly of Li-ion Batteries, and Measurements of Performance at High Temperature