Effect of Dry-Wet Ratio on Properties of Concrete Under Sulfate Attack

In order to explore the drying-wetting cycle test method of concrete under sulfate accelerating erosion, the influence of dry-wet time ratio on concrete sulfate erosion was studied. Under the condition of 7 days for one cycle, five different dry-wet time ratios were designed: 1:3, 1:1, 3:1, 5:1, and 10:1. The basic properties such as compressive strength, splitting tensile strength and dynamic elastic modulus of concrete were tested. Scanning electron microscopy (SEM) was used to analyze the microstructure of concrete before and after erosion. The test results show that under the environment of sulfate drying-wetting cycle erosion, the change of mechanical properties of concrete are divided into three stages: ascending period, fluctuating period and rapid descending period. Concrete is subjected to periodic damage process of initial damage followed by filling compaction, cracking, further filling, and cracking again, in that order. Dry-wet ratio has a significant effect on concrete sulfate attack. Under the same drying-wetting cycle period, as the dry-wet ratio increases, the degree of deterioration of concrete by sulfate attack increases first and then decreases. When the dry-wet ratio is 5:1, the deterioration is the most serious.