Related Experiment Video

Updated: Jan 20, 2026

Vapor Phase Deposition of Electroactive Poly(3,4-ethylenedioxythiophene) onto Electrospun Commodity Polymer Nanofibers
08:28

Vapor Phase Deposition of Electroactive Poly(3,4-ethylenedioxythiophene) onto Electrospun Commodity Polymer Nanofibers

Published on: March 7, 2025

1.8K

Biocompatibility of Cyclopropylamine-Based Plasma Polymers Deposited at Sub-Atmospheric Pressure on Poly

Ke Vin Chan1, Mahtab Asadian2, Iuliia Onyshchenko2

  • 1Research Unit Plasma Technology (RUPT), Department of Applied Physics, Faculty of Engineering and Architecture, Ghent University, Sint-Pieternieuwstraat 41, 9000 Ghent, Belgium. KeVin.chan@UGent.be.

Nanomaterials (Basel, Switzerland)
|August 31, 2019
PubMed

Keywords:
biomaterialscell adhesionnanofibersnon-thermal plasmaplasma polymerisation

More Related Videos

Melt Electrospinning Writing of Three-dimensional Poly(ε-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications12:28

Melt Electrospinning Writing of Three-dimensional Poly(ε-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

Published on: December 23, 2017

15.7K
An Atmospheric Pressure Plasma Setup to Investigate the Reactive Species Formation08:36

An Atmospheric Pressure Plasma Setup to Investigate the Reactive Species Formation

Published on: November 3, 2016

10.4K

Related Concept Videos

Vapor Phase Deposition of Electroactive Poly(3,4-ethylenedioxythiophene) onto Electrospun Commodity Polymer Nanofibers08:28

Vapor Phase Deposition of Electroactive Poly(3,4-ethylenedioxythiophene) onto Electrospun Commodity Polymer Nanofibers

This paper describes a simple technique for coating electrospun PAN nanofibers with electroactive polymers using vapor deposition. The effects of the oxidant FeCl₃ on the deposition of poly(3,4-ethylenedioxythiophene) coatings on PAN were investigated to understand and optimize polymer growth, fiber diameter, and overall mechanical strength of the nanofiber...
1.8K
Melt Electrospinning Writing of Three-dimensional Poly(ε-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications12:28

Melt Electrospinning Writing of Three-dimensional Poly(ε-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

This protocol serves as a comprehensive guideline to fabricate scaffolds via electrospinning with polymer melts in a direct writing mode. We systematically outline the process and define the appropriate parameter settings for achieving targeted scaffold...
15.7K
An Atmospheric Pressure Plasma Setup to Investigate the Reactive Species Formation08:36

An Atmospheric Pressure Plasma Setup to Investigate the Reactive Species Formation

An experimental setup was created for the helium-operated kHz frequency plasma jet. The setup includes a cage for the plasma power supply and jet and an in-house built reactor to monitor plasma-induced reactive species without the interference of the ambient atmosphere.
10.4K
Treating Surfaces with a Cold Atmospheric Pressure Plasma using the COST-Jet06:36

Treating Surfaces with a Cold Atmospheric Pressure Plasma using the COST-Jet

This protocol is presented to characterize the setup, handling, and application of the COST-Jet for the treatment of diverse surfaces such as solids and...
4.5K
Optimizing Attachment of Human Mesenchymal Stem Cells on Poly(ε-caprolactone) Electrospun Yarns10:50

Optimizing Attachment of Human Mesenchymal Stem Cells on Poly(ε-caprolactone) Electrospun Yarns

This article describes a range of set-ups for seeding human mesenchymal stem cells onto materials, in this case electrospun yarns, that do not cover the base of standard culture well plates in order to maximize and quantify the number of cells that initially attach compared to the known seeding...
10.1K
How to Ignite an Atmospheric Pressure Microwave Plasma Torch without Any Additional Igniters08:42

How to Ignite an Atmospheric Pressure Microwave Plasma Torch without Any Additional Igniters

This movie shows how an atmospheric plasma torch can be ignited by microwaves with no additional igniters and provides a stable and continuous plasma operation suitable for plenty of applications.
20.6K