Validation studies on activated carbon fiber passive sampler for PCDD/Fs and PCBs in water

The toxicity of polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) is well known, and for this reason studying and monitoring these chemicals is fundamental. Activated carbon fibers (ACFs) are made of an adsorbent material widely used in the industrial field for the removal of micropollutants. The first step in this work was to perform a physico-chemical characterization of the adsorbent, focused on the analytical use of it. In particular, its specific surface area was defined around 2500 m²/g consisting in a homogeneous microporosity distribution and the characterization of ACF surface functional groups pointed out a balance between basic and acidic group. The validity of using the ACF as solid phase extraction and as passive sampler for PCDD/Fs and PCBs in water, has been evaluated by the percentage recovery (R %) of ¹³C₁₂-labeled standards of PCDD/Fs and PCBs added in a known volume of water. The results were compared to the R% of Liquid-Liquid Extraction which showed a better reproducibility of the results and the proposed method satisfy completely the requirements of US EPA reference methods.