Low loss slow light propagation in silicon slot waveguide

Optics Express
|September 13, 2019
PubMed

Related Concept Videos

Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities11:08

Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities

Use of photonic crystal slow light waveguides and cavities has been widely adopted by the photonics community in many differing applications. Therefore fabrication and characterization of these devices are of great interest. This paper outlines our fabrication technique and two optical characterization methods, namely: interferometric (waveguides) and resonant scattering...
19.5K
Terahertz Microfluidic Sensing Using a Parallel-plate Waveguide Sensor07:28

Terahertz Microfluidic Sensing Using a Parallel-plate Waveguide Sensor

The procedure for implementing a refractive index sensor for terahertz frequencies based on a grooved parallel-plate waveguide geometry is described here. The method yields a measurement of the refractive index of a small volume of liquid through monitoring of the shift in the resonant frequency of the waveguide...
11.1K
Fabrication of Zero Mode Waveguides for High Concentration Single Molecule Microscopy08:01

Fabrication of Zero Mode Waveguides for High Concentration Single Molecule Microscopy

Described here is a nanosphere lithography method for parallel fabrication of zero mode waveguides, which are arrays of nanoapertures in a metal-clad glass microscopy coverslip for single molecule imaging at nano- to micromolar concentrations of fluorophores. The method takes advantage of colloidal crystal self-assembly to create a waveguide...
8.6K
Line Loss01:10

Line Loss

The different configurations of source-load connections include wye (star) and delta connections. The relationship between line and phase voltages and currents varies depending on the configuration. When the source is supplying power, it is transmitted through the wires to the load, and during this transmission, some power is absorbed by the wires, leading to line loss.
Line loss impacts power delivery efficiency in a balanced three-phase circuit. The symmetry in such a circuit simplifies the...
517
Light Enhanced Hydrofluoric Acid Passivation: A Sensitive Technique for Detecting Bulk Silicon Defects09:15

Light Enhanced Hydrofluoric Acid Passivation: A Sensitive Technique for Detecting Bulk Silicon Defects

A RT liquid surface passivation technique to investigate the recombination activity of bulk silicon defects is described. For the technique to be successful, three critical steps are required: (i) chemical cleaning and etching of silicon, (ii) immersion of silicon in 15% hydrofluoric acid and (iii) illumination for 1...
9.6K
Piping Networks and Pressure Losses12:27

Piping Networks and Pressure Losses

Source: Alexander S Rattner, Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA
This experiment introduces the measurement and modeling of pressure losses in piping networks and internal flow systems. In such systems, frictional flow resistance from channel walls, fittings, and obstructions causes mechanical energy in the form of fluid pressure to be converted to heat. Engineering analyses are needed to size flow hardware to ensure...
61.5K