Uncovering material flow analysis of waste cathode ray tubes television in China

Cathode ray tube televisions (TVs) contributes significantly to the rapidly increasing waste stream of cathode ray tubes in the e-waste. This study mainly focused on the material flow of waste cathode ray tube TVs in China. Currently, waste cathode ray tubes constitute a major part of the total generation of e-waste in China. The study aimed to emphasise the flow of materials in the generated waste cathode ray tube TVs by using stock-based material flow analysis model. The modelling was conducted to investigate the disposable number of obsolete devices, in-use stock, and end-of-life of cathode ray tube TVs. SubSTance flow ANalysis (STAN) software was used to perform the material flow analysis modelling and graphical model of the waste cathode ray tube TVs. The results show that in a period of 10 years, overall about 3241.37 kt of cathode ray tube TVs were net produced in China, containing 183.6 kt of glass, 1718.2 kt of plastic, 243 kt of steel/iron, 153.5 kt of lead, 76.6 kt of copper, 7.8 kt of aluminium, and 1.6 kt of antimony. The results revealed that almost 125 kt of end-of-life cathode ray tube TVs containing about 68 kt of glass, 40 kt of plastic, 9 kt of steel/iron, 6 kt of lead, 3 kt of copper, 0.3 kt of aluminium, and 0.07 kt of antimony were dumped in the period of 10 years. Therefore, the management of waste cathode ray tube TVs required better infrastructure for recycling and better regulation to achieve better results in the high recovery of valuable resources.