Related Experiment Video
Updated: Jan 5, 2026

Fabrication, Operation and Flow Visualization in Surface-acoustic-wave-driven Acoustic-counterflow Microfluidics
Published on: August 27, 2013
Focusing surface acoustic waves assisted electrochemical detector in microfluidics
Tengfei Zheng1,2, Yue Liu1,2, Chaoping Xu1,2
1State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, P. R. China.
Abstract:
This article demonstrates a novel electrochemical detection device. The device is composed by two focusing interdigital transducers for exciting focused surface acoustic waves by applying an AC signal, a three-electrode system for electrochemical measurement, and a liquid pool for holding liquid on a LiNbO3 wafer. The amperometry current of ferrocenecarboxylic acid and potassium phosphate buffer solution is used to characterize the detection sensitivity. Two experiments are carried out to optimize the device design. The result shows that the two focusing interdigital transducers with arc degree 30° and distance 5 mm can remarkably enhance the liquid mixing rate. Under this condition, the oxidation current is about 27 times larger than that without surface acoustic wave stirring.
More Related Videos
06:51Microparticle Manipulation by Standing Surface Acoustic Waves with Dual-frequency Excitations
Published on: August 21, 2018
13:42Dry Film Photoresist-based Electrochemical Microfluidic Biosensor Platform: Device Fabrication, On-chip Assay Preparation, and System Operation
Published on: September 19, 2017