Related Experiment Video
Updated: Jan 3, 2026

20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier
Published on: July 12, 2017
Study on the temperature dependent characteristics of O-band bismuth-doped fiber amplifier
Abstract:
We report the temperature dependent performance of an O-band bismuth (Bi)-doped fiber amplifier (BDFA) in the temperature range from -60 to +80°C. At room temperature, maximum gains of 27 and 40 dB with noise figures (NFs) of 4.3 and 4.8 dB are measured for -23 dBm signal power in the single and double pass BDFA, respectively. An increment in gain and reduction in NF is observed as the ambient temperature of the BDFA is reduced. In the double pass BDFA, the temperature dependent gain coefficient from -60 to +80°C is found to be around -0.02 and -0.03 dB/°C across the wavelength band of 1300-1360 nm for -10 and -23 dBm signal powers, respectively. We also study the gain and NF characteristics with pump power and signal power at different temperatures, and a maximum gain of 45 dB is obtained at -60°C for -30 dBm signal power.
Related Concept Videos
BJT Amplifiers
In BJT amplifier configurations, particularly in common-emitter setups, the transistor's role...
Frequency Response of Op Amp Circuits
Frequency Response and Gain:
The gain of the op-amp, A(ω), is not a constant but a function of the input signal frequency. An op-amp can maintain a constant gain at low frequencies, known...

