Development of a static test apparatus for evaluating the performance of three PM_2.5 separators commonly used in...

PM_2.5 separator directly affects the accuracy of PM_2.5 sampling. The specification testing and evaluation for PM_2.5 separator is particularly important, especially under China's wide variation of terrain and climate. In this study, first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_2.5 separators. A uniform mixing chamber was developed to make particles mix completely. The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%, and the particle size distribution obeyed logarithmic normal distribution with an R² of 0.996. The flow rate deviation between the measurement and the set point flow rate agreed to within ±1.0% in the range of -40 to 50°C. Secondly, the separation, flow and loading characteristics of three cyclone separators (VSCC-A, SCC-A and SCC112) were evaluated using this system. The results showed that the 50% cutoff sizes (D₅₀) of the three cyclones were 2.48, 2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates, respectively. The geometric standard deviation (GSD) of the capture efficiency of VSCC-A was 1.23, showed a slightly sharper than SCC-A (GSD =1.27), while the SCC112 did not meet the relevant indicator (GSD = 1.2 ± 0.1) with a GSD = 1.44. The flow rate and loading test had a great effect on D₅₀, while the GSD remained almost the same as before. In addition, the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.