Density Fluctuations in Fluids Having an Internal Degree of Freedom

Raymond D Mountain1

  • 1Institute for Basic Standards, National Bureau of Standards, Washington, D.C. 20234.

Related Concept Videos

Characteristics of Fluids01:20

Characteristics of Fluids

When a force is applied parallel to the top surface of a solid, it resists the applied force due to the internal frictional forces between the layers of the solid known as shearing resistance. However, when the force is removed, the shearing forces restore the original shape of the solid. Other deformation forces also cause temporary changes in shape if the forces are not beyond a threshold magnitude. Solids tend to retain their shape, making the study of their rest and motion easier. Beyond...
7.5K
Characteristics of Fluids01:31

Characteristics of Fluids

Fluids differ from solids primarily in their molecular structure and stress response. Solids have tightly packed molecules with strong intermolecular forces, maintaining their shape and resisting deformation. In contrast, fluids have molecules spaced farther apart with weaker forces, allowing them to flow and deform easily.
Fluids, which include both liquids and gases, are substances that deform continuously under shearing stress. For example, water and oil are liquids with molecules that can...
905
Newtonian Fluid: Problem Solving01:18

Newtonian Fluid: Problem Solving

Newtonian fluids exhibit a constant viscosity, meaning their shear stress and shear strain rate are directly proportional. This property ensures a predictable and stable response to applied forces, maintaining a linear relationship between force and flow. Examples include water, air, and light oils, consistently demonstrating this proportional behavior regardless of external conditions.
A velocity gradient forms within the fluid when a Newtonian fluid is placed between two parallel plates, with...
809
Pressure of Fluids01:14

Pressure of Fluids

There are many examples of pressure in fluids in everyday life, such as in relation to blood (high or low blood pressure) and in relation to weather (high- and low-pressure weather systems). A given force can have a significantly different effect, depending on the area over which the force is exerted. For instance, a force applied to an area of 1 mm2 has a pressure that is 100 times greater than the same force applied to an area of 1 cm2. That's why a sharp needle is able to poke through...
21.4K
Pressure Variation in a Fluid at Rest01:11

Pressure Variation in a Fluid at Rest

In a fluid at rest, the pressure at any point beneath the fluid surface depends solely on the depth, not on the container's shape or size. This principle, known as hydrostatic pressure, arises because, in stationary fluids, there is no acceleration, meaning the forces within the fluid balance out. Only vertical forces, caused by the weight of the fluid above, contribute to pressure changes with depth.
When measuring pressure at two different levels within the fluid, the difference in...
693
Euler's Equations of Motion01:28

Euler's Equations of Motion

In fluid mechanics, shear stresses arise from viscosity, which represents a fluid's internal resistance to deformation. For low-viscosity fluids, like water, these stresses are minimal, simplifying flow analysis by allowing the fluid to be treated as inviscid, or frictionless. In an inviscid fluid, shear stresses are absent, leaving only normal stresses, which act perpendicularly to fluid elements. Notably, pressure — defined as the negative of the normal stress — remains uniform across...
833