An ion release controlled Cr(VI) treatment agent: Nano zero-valent iron/carbon/alginate composite gel

A simple iron/carbon composite was prepared by ion exchange and carbothermal reduction, and the characterization results showed that this material contained a large amount of nanoscale zero-valent iron. Then above material was coated with alginate to form a stable gel, which combined adsorption and reduction to remove Cr(VI) efficiently and controllably. The experiment showed that the optimal conditions for Cr(VI) removal were pH value, dosage and Cr(VI) concentration of 2, 2 g L^-1 and 20 mg L^-1, respectively. For 150 mL of 20 mg L^-1 Cr(VI) solution, the removal efficiency could reach 100% in 6 h (dosage: 2 g L^-1). Compared with activated carbon-alginate complex and pure alginate, the introduction of nanoscale zero-valent iron greatly accelerated the rate of Cr(VI) removal. In addition, adsorption isotherm and kinetics conformed to Freundlich and Elovich model, respectively. Under pH 2, the release of iron ion increased linearly with time and reached 51.87 mg L^-1 in 8 h. The mechanism of Cr(VI) removal of iron/carbon composite coated with alginate might be controlled by two steps: the initial adsorption and fixation, and subsequent reduction. In general, the material is efficient, recyclable and controllable, which provides a new idea for the treatment of chromium-containing wastewater.