Combustion and emission analysis of hydrogenated waste polypropylene pyrolysis oil blended with diesel

Petroleum-based plastic pyrolysis oil contains unsaturated compounds, and the presence of these compounds makes the produced fuel unsuitable for combustion in diesel engines. Hydrogenation of pyrolysis oil is performed to convert unsaturated compounds to saturated compounds. Past studies have shown that hydrogenation of petroleum-based plastic pyrolysis oil is viable; however, its combustion and emissions analysis in diesel engines has not yet been reported. In this study, we investigated the combustion, performance, and emissions of hydrogenated polypropylene pyrolysis oil (HPPO) blended with diesel. Polypropylene (PP) was converted to pyrolysis oil using ZSM-5 as the catalyst. The hydrogenation of polypropylene pyrolysis oil (PPO) was conducted at pressure of 70 bar, and the reaction temperature was maintained at 350 °C. Ni metal impregnated on the ZSM-5 base support was used as the catalyst of choice. The produced HPPO possessed physicochemical properties that match the EN590 standards(European diesel fuel standards). Gas chromatography-mass spectrometry (GC-MS) studies of PPO and HPPO showed the effectiveness of hydrogenation for the complete conversion of alkenes to alkanes, and hydrocracking resulted in cracking higher carbon number alkanes to lower values. HPPO was blended with diesel in ratios of 10 wt.%, 20 wt.%, 30 wt.%, and 40 wt.%. The diesel engine performance results for the blended fuel showed combustion, performance, and emissions on par with pure diesel fuel for blending ratios up to 20 wt.%. As is known, plastic solid waste (PSW) materials pose serious hazards to the environment. Our HPPO physicochemical properties matched the EN590 standards for diesel fuel. The combustion of HPPO in diesel engines can provide an option for environmentally cleaner disposal of PSW.