A novel photoelectrochemical sensor based on tailoring printable mesoscopic chip for fast and real-time phospholipids
Pei Li1, Muhan Zhang2, Chong Sun2
1Institute of Agricultural Products Processing, Jiangsu Academy of Agricultural Sciences, Nanjing 210014, China; College of Food Science and Engineering, Yangzhou University, Yangzhou 225127, China.
Abstract:
The detection of phospholipids oxidation is important for meat control and disease prevention. In this paper, a photoelectrochemical sensor based on printable mesoscopic chip (PMC) for fast and real-time monitoring phospholipids oxidation was designed and fabricated. TiO2, ZrO2 and carbon films of PMC were screen-printed onto the FTO glass layer by layer. The PMC and the feasibility for determination of phospholipids oxidation were investigated by scanning electron microscope (SEM), UV-vis spectroscopy, cyclic voltammograms (CVs) and electrochemical impedance spectroscopy (EIS), etc. The short circuit current (Jsc) was used as a signal current, which would decrease if phospholipids in PMC were undergoing oxidation for the change of electrical properties. Compared with other methods, phospholipids in PMC did not require pretreatment, and the process was nondestructive and real-time. Meanwhile, this method showed high sensitivity and good selectivity. The fabricating process of PMC is simple, and the costs are low, relatively.
More Related Videos
13:42Dry Film Photoresist-based Electrochemical Microfluidic Biosensor Platform: Device Fabrication, On-chip Assay Preparation, and System Operation
Published on: September 19, 2017
11:18Manufacturing of a Nafion-coated, Reduced Graphene Oxide/Polyaniline Chemiresistive Sensor to Monitor pH in Real-time During Microbial Fermentation
Published on: January 7, 2019