Vibration annoyance assessment of train induced excitations from tunnels embedded in rock

Train movements generate oscillations that are transmitted as waves through the track support system into its surroundings. The vibration waves propagate through the soil layers and reach to nearby buildings creating distractions for human activities and causing equipment malfunctioning. Not only the train components and the rails, but also the surrounding tunnel, soil and rock strata have dynamic characteristics that play significant roles in the vibration levels felt in a nearby structure. This paper presents a finite element study conducted to investigate the vibrations resulting from train movements in nearby subway tunnels. The subway line is located at an average horizontal distance of 50 ft (15.2 m) from the structure in assessment, which is a six-story office building. The main goal of the work is to assess the train-induced vibrations at the ground level of the building through a case study and sensitivity analysis. A plane strain finite element model is built to represent the railroad tunnel embedded in the rock and the soil stratum above it. The one train loading function is applied to the model as a point source at the track level and compared to the two-train scenario. Other simulations are undertaken for sensitivity analysis involving increased loading, decreased damping and decreased distance to tunnels. Even though there are several numerical studies on the propagation of train induced vibrations in the literature; a finite element model accompanied with a sensitivity analysis has not been discussed in detail in a technical publication before. The paper not only presents the finite element modeling but also compares the results with the criteria of Transit Noise and Vibration Impact Assessment Manual, which was published by the Federal Transit Administration (FTA) of the U.S. Department of Transportation.