Related Experiment Video
Updated: Dec 29, 2025

Continuous-Wave Propagation Channel-Sounding Measurement System - Testing, Verification, and Measurements
Published on: June 25, 2021
Evaluating the Vulnerability of Several Geodetic GNSS Receivers under Chirp Signal L1/E1 Jamming
Matej Bažec1, Franc Dimc1, Polona Pavlovčič-Prešeren2
1Faculty of Maritime studies and Transport, University of Ljubljana, Cesta pomorščakov 4, 6320 Portorož, Slovenia.
Abstract:
Understanding the factors that might intentionally influence the reception of global navigation satellite system (GNSS) signals can be a challenging topic today. The focus of this research is to evaluate the vulnerability of geodetic GNSS receivers under the use of a low-cost L1/E1 frequency jammer. A suitable area for testing was established in Slovenia. Nine receivers from different manufacturers were under consideration in this study. While positioning, intentional 3-minute jammings were performed by a jammer that was located statically at different distances from receivers. Furthermore, kinematic disturbances were performed using a jammer placed in a vehicle that passed the testing area at various speeds. An analysis of different scenarios indicated that despite the use of an L1/E1 jammer, the GLONASS (Russian: Globalnaya Navigatsionnaya Sputnikovaya Sistema) and Galileo signals were also affected, either due to the increased carrier-to-noise-ratio (C/N0) or, in the worst cases, by a loss-of-signal. A jammer could substantially affect the position, either with a lack of any practical solution or even with a wrong position. Maximal errors in the carrier-phase positions, which should be considered a concern for geodesy, differed by a few metres from the exact solution. The factor that completely disabled the signal reception was the proximity of a jammer, regardless of its static or kinematic mode.
More Related Videos
Related Concept Videos
Errors in Global Positioning System
Field Application of Global Positioning System
Types of Global Positioning System Surveys
Receiver Operating Characteristic Plot
Introduction to Global Positioning System
Design Example: Identifying the Locations of Monuments in the Field Using Global Positioning System Device

