Doped Poly(3-hexylthiophene) Coatings onto Chitosan: A Novel Approach for Developing a Bio-Based Flexible Electronic

Conductive and flexible bio-based materials consisting of chitosan films coated with conductive poly(3-hexylthiophene) (P3HT) were prepared. Thermal, optical, mechanical, morphological, wettability, and conductive properties were analyzed. In a very simple and effective method of chitosan film modification, a controlled volume of a P3HT solution was deposited onto a previously formed chitosan film, assisted by the spin coating method. Later, P3HT-coated chitosan films were doped by simple contact with an aqueous solution of HAuCl₄. The use of HAuCl₄ becomes attractive because the reports on the doping process in this type of material using this reagent are still scarce and recent to date. In addition, since this acid is a well-known metal nanoparticle precursor, its use opens new future perspectives for these materials into new applications. The effect of P3HT concentration and doping times on film properties was studied. Attenuated total reflectance spectroscopy and UV-Vis spectroscopy allowed us to demonstrate that the presence of the P3HT coating and its doping induce significant changes in the vibrational modes and optoelectronic properties of samples. Additionally, the images obtained by scanning electron microscopy showed a well-distributed and homogeneous coating on the surface of chitosan films. Measured conductivity values of doped film samples fall in the range from 821.3 to 2017.4 S/m, representing, to the best of our knowledge, the highest values reported in the literature for chitosan/chitin-based materials. Indeed, these values are around or even higher than those obtained for some materials purely consisting of conductive polymers.