Related Experiment Video
Updated: Dec 28, 2025
Engineering Platform and Experimental Protocol for Design and Evaluation of a Neurally-controlled Powered Transfemoral Prosthesis
Published on: July 22, 2014
Impedance Control Strategies for Enhancing Sloped and Level Walking Capabilities for Individuals with Transfemoral
Krishan Bhakta1, Jonathan Camargo1,2, Pratik Kunapuli3
1Woodruff School of Mechanical Engineering, College of Engineering, Georgia Institute of Technology, Atlanta, GA USA.
Introduction:
Powered prostheses are a promising new technology that may help people with lower-limb loss improve their ability to perform locomotion tasks. Developing active prostheses requires robust design methodologies and intelligent controllers to appropriately provide assistance to the user for varied tasks in different environments. The purpose of this study was to validate an impedance control strategy for a powered knee and ankle prosthesis using an embedded sensor suite of encoders and a six-axis load cell that would aid an individual in performing common locomotion tasks, such as level walking and ascending/descending slopes.
Materials And Methods:
Three amputees walked on a treadmill and four amputees walked on a ramp circuit to test whether a dual powered knee and ankle prosthesis could generate appropriate device joint kinematics across users.
Results:
Investigators found that tuning 2-3 subject-specific parameters per ambulation mode was necessary to render individualized assistance. Furthermore, the kinematic profiles demonstrate invariance to walking speeds ranging from 0.63 to 1.07 m/s and incline/decline angles ranging from 7.8° to 14°.
Conclusion:
This work presents a strategy that requires minimal tuning for a powered knee & ankle prosthesis that scales across a nominal range of both walking speeds and ramp slopes.
