Inverse Filtering for Frequency Identification of Bridges Using Smartphones in Passing Vehicles: Fundamental...

This paper puts forward a novel methodology of employing inverse filtering technique to extract bridge features from acceleration signals recorded on passing vehicles using smartphones. Since the vibration of a vehicle moving on a bridge will be affected by various features related to the vehicle, such as suspension and speed, this study focuses on filtering out these effects to extract bridge frequencies. Hence, an inverse filter is designed by employing the spectrum of vibration data of the vehicle when moving off the bridge to form a filter that will remove the car-related frequency content. Later, when the same car is moving on the bridge, this filter is applied to the spectrum of recorded data to suppress the car-related frequencies and amplify the bridge-related frequencies. The effectiveness of the proposed methodology is evaluated with experiments using a custom-built robot car as the vehicle moving over a lab-scale simply supported bridge. Nine combinations of speed and suspension stiffness of the car have been considered to investigate the robustness of the proposed methodology against car features. The results demonstrate that the inverse filtering method offers significant promise for identifying the fundamental frequency of the bridge. Since this approach considers each data source separately and designs a unique filter for each data collection device within each car, it is robust against device and car features.