Micro-Ultrasonic Viscosity Model Based on Ultrasonic-Assisted Vibration Micro-Injection for High-Flow Length Ratio...

A micro-ultrasonic (MU) viscosity model based on ultrasonic-assisted vibration micro-injection for high- flow length ratio polymer parts was established. This model considered the effects of ultrasonic energy and the characteristic microdimension. Ultrasonic energy parameters (such as the ultrasonic amplitude, frequency, and ultrasound velocity), the characteristic microdimension, and the molecular chain length (MCL) were introduced into the MU viscosity model. An ultrasonic micro-injection experimental platform was built on an injection molding machine. Polypropylene (PP) filling experiments were carried out using microgrooves with different flow length ratios (depth-to-width ratios of 3:1, 5:1, and 10:1). The validity and accuracy of the MU viscosity model were examined through a filling experiment with polypropylene (PP) microgroove injection molding and by a flow pressure difference experiment with polystyrene (PS). The results showed that the MU viscosity model was in better agreement with the experimental results compared to other models. The maximum error of the MU model was 4.9%. Ultrasound-assisted vibration had great effects on the filling capacity for microgrooves with high flow length ratios (depth-to-width ratios greater than 5:1). The filling capacity increased as the ultrasonic amplitude increased.