Sulfonated Polyaniline as Zwitterionic and Conductive Interfaces for Anti-Biofouling on Open Electrode Surfaces in...

Electrodynamic systems for bioanalytical applications constantly suffer from biofouling due to electrical field-induced nonspecific bioadsorption on electrode surfaces. To minimize this issue, surface modification using anti-biofouling and conductive materials is necessary to not only protect the electrode surface from nonspecific bioadsorption but also maintain desired electrodynamic properties for electrode operation. In this study, we designed and prepared a conductive, zwitterionic, and self-doped sulfonated polyaniline (SPANI) coating on Au electrode surfaces for anti-biofouling applications. The zwitterionic coating was fabricated by electrochemical polymerization of aniline on the Au electrode surface functionalized with cysteamine (HS-CH₂CH₂-NH₂) and then a post-polymerization treatment with fuming sulfuric acid. We found that the SPANI-coated electrodes exhibited an excellent anti-biofouling ability in dielectrophoresis (DEP) capturing-and-releasing processes, with a very low average residual mass rate of 1.44% for the SPANI-5s electrode, whereas electrodes modified with poly(ethylene glycol) (PEG) gave an average residual mass rate of 14.30%. Even under continuous operation for more than 1 h, the SPANI-5s electrode still showed stable anti-biofouling ability for an 11-cycle E. coli capturing-and-releasing DEP process, with the residual mass rate for all 11 cycles being kept at or below 2.18% to give an average residual mass rate of 1.62% with a standard deviation of 0.40%. This study demonstrates that electrodynamic systems with zwitterionic SPANI coated on open electrode surfaces can excellently function with decent conductance and anti-biofouling performance.