Using polyethylene glycol to promote Nannochloropsis oceanica growth with 15 vol% CO₂

CO₂ capture with microalgae has been put forward in response to global concern on greenhouse gas emission. However, the short residence time and slow diffusion of CO₂ in water limits the growth of microalgae. In order to improve CO₂ transfer from gas phase to liquid phase and utilization by algal cells, polyethylene glycol 200 (PEG 200) was used as CO₂ absorbent to promote growth of Nannochloropsis oceanica with the bubbling of 15 vol% CO₂. Total inorganic carbon (TIC) absorbed in culture medium remained constant at 5.6 mM when 15 vol% CO₂ was bubbled continuously. PEG 200 in the medium provided additional CO₂ absorption from 0.6 to 4.8 mM when PEG 200 concentration increased from 0.5 to 4 mM. The specific growth rate of N. oceanica reached the maximum (1.41 d^-1) with 1 mM PEG 200 in culture medium, which was 21.5% higher than the specific growth rate without PEG 200. About 79% of the increase in biomass was attributed to the increased TIC with more CO₂ dissolution in culture medium because of PEG 200, and about 21% was attributed to PEG 200 itself utilized as an organic carbon source. In conclusion, PEG 200 as a CO₂ absorbent can effectively capture flue-gas CO₂ for algal growth.