Related Experiment Video
Updated: Dec 26, 2025

Assessing Disaster Resilience of Concrete with Titanium Dioxide Nanoparticles
Published on: November 14, 2025
Effect of Elevated Temperature on Compressive Strength and Physical Properties of Neem Seed Husk Ash Concrete
Kizito Patrick Mwilongo1,2,3, Revocatus Lazaro Machunda2,4, Yusufu Abeid Chande Jande1,2
1Department of Materials and Energy Science and Engineering, the Nelson Mandela African Institution of Science and Technology, P.O. Box 447, Arusha 23311, Tanzania.
Abstract:
High temperature rise mostly caused by a fire outbreak is currently becoming a threat that endangers concrete's structural performance for buildings and the safety of occupants. The behavior of concrete after fire subjection has been of much interest for the structural materials design purposes. This study investigated the physical properties and the compressive strength of M25 concrete incorporating Neem Seed Husk Ash (NSHA), exposed to and through targeted different levels of temperature (200 °C to 800 °C) for a period of three hours in an electric furnace. The NSHA was produced by calcining neem seed husks at 800 °C for six hours and then sieved through the 125 μm sieve. Different amounts of NSHA were investigated while considering the plain concrete as the control sample. 150 concrete cubes of 150 mm sizes were cast and properly cured for 7 and 28 days. The experimental results show that the compressive strength of the 5% NSHA concrete exposed to temperatures up to 400 °C is 21.3% and 23.8% better than the normal concrete at 7 and 28 curing days, respectively. Surface cracks and spalling are noticeable at 600 °C and 800 °C for all samples considered in this study.
More Related Videos
10:52Conducting Elevated Temperature Normal and Combined Pressure-Shear Plate Impact Experiments Via a Breech-end Sabot Heater System
Published on: August 7, 2018
05:38Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
Related Concept Videos
Hot Weather Concreting
Mitigating the heat increase in concrete can be economically achieved by shading aggregate stockpiles to prevent heating from solar radiation,...
Design Example: Managing Concrete Workability
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Impact Strength of Concrete
Mass Concreting
To reduce the risk of such cracking, the concrete mix may incorporate low-heat cement and pozzolans to reduce the temperature rise. Pre-cooled angular aggregates and water-reducing admixtures...