Development of Polyoxymethylene Particles via the Solution-Dissolution Process and Application to the Powder Bed...

In this study, the development of a polyoxymethylene (POM) feedstock material for the powder bed fusion (PBF) of polymers is outlined. POM particles are obtained via liquid-liquid phase separation (LLPS) and precipitation, also known as the solution-dissolution process. In order to identify suitable POM solvent systems for LLPS and precipitation, in the first step, a solvent screening based on solubility parameters was performed, and acetophenone and triacetin were identified as the most promising suitable moderate solvents for POM. Cloud point curves were measured for both solvents to derive suitable temperature profiles and polymer concentrations for the solution-dissolution process. In the next step, important process parameters, namely POM concentration and stirring conditions, were studied to elucidate their effect on the product's properties. The product particles obtained from both aforementioned solvents were characterized with regard to their morphology and size distribution, as well as their thermal properties (cf. the PBF processing window) and compared to a cryo-milled POM PBF feedstock. Both solvents allowed for precipitation of POM particles of an appropriate size distribution for PBF for polymer concentrations of at least up to 20 wt.%. Finally, a larger powder batch for application in the PBF process was produced by precipitation from the preferred solvent acetophenone. This POM powder was further analyzed concerning its flowability, Hausner ratio, and mass-specific surface area. Finally, test specimens, namely a complex gyroid body and a detailed ornament, were successfully manufactured from this feedstock powder showing appropriate bulk solid and thermal properties to demonstrate PBF processability. In summary, a processable and suitable POM PBF feedstock could be developed based on the non-mechanical solution dissolution process, which, to the authors' best knowledge, has not been reported in previous studies.