Critical topological nodal points and nodal lines/rings in Kagome graphene

Jun Zhou1, Yuee Xie1, Shengbai Zhang2

  • 1School of Physics and Optoelectronics, Xiangtan University, Xiangtan, 411105, Hunan, China and Faculty of Science, Jiangsu University, Zhenjiang, 212013, Jiangsu, China. yueex@ujs.edu.cn chenyp@ujs.edu.cn.

Related Concept Videos

Nodal Analysis01:10

Nodal Analysis

Nodal analysis is a fundamental method in electrical engineering used to simplify the process of circuit analysis. This method revolves around the concept of using node voltages as the primary variables for circuit analysis. The objective is to determine the voltage at each node in a circuit, which can then be used to find other quantities of interest, such as currents through specific components.
Consider, for instance, a simple circuit composed of three nodes and three resistors, as shown in...
1.7K
Nodal Analysis with Voltage Sources01:11

Nodal Analysis with Voltage Sources

Nodal analysis is a remarkably effective method used in electrical engineering to simplify the analysis of complex circuits, including those with dependent or independent voltage sources. Its strength lies in its systematic approach to breaking down circuits into manageable components, making it easier for engineers to understand and solve.
Consider a circuit that contains four resistors and two voltage sources, as shown in Figure 1. One of these voltage sources is connected between a...
1.8K
Node Analysis for AC Circuits01:14

Node Analysis for AC Circuits

Consider an angioplasty system featuring a catheter equipped with a turbine, a critical tool for removing plaque deposits from coronary arteries. This intricate medical device operates using a circuit model reminiscent of a dual-node RLC circuit powered by a current-controlled voltage source.
To unravel the complexities of this system, nodal analysis is employed, a powerful technique founded on Kirchhoff's current law (KCL), which remains valid for phasors. AC circuits can effectively be...
582
Equipotential Surfaces and Conductors01:16

Equipotential Surfaces and Conductors

For a conductor in which all charges are at rest, the conductor's surface is equipotential. The electric field is always perpendicular to equipotential surfaces. Therefore, in a conductor with static charges, the electric field just outside the conductor is always perpendicular to the conductor's surface. Any tangential component of the electric field will cause charges to move inside the conductor, which will violate the electrostatic nature of the system. In an electrostatic...
4.2K
Mohr's Circle for Plane Strain01:18

Mohr's Circle for Plane Strain

Mohr's circle is a crucial graphical method used to analyze plane strain by plotting strain on a set of cartesian coordinates, where the abscissa is normal strain ∈ and the ordinate is shear strain γ. Similarly to Mohr’s circle for plane stress, two points X and Y are plotted. Their coordinates are (∈x, -γXY) and (∈Y, γXY), respectively.
Mohr's circle visually represents the strain states under various conditions, which is essential for...
1.1K
Graphs of Polar Equations01:17

Graphs of Polar Equations

The polar coordinate system represents points using a distance from a central point (the pole) and an angle from a reference direction (the polar axis). Unlike rectangular coordinates, polar coordinates are ideal for graphing curves with radial symmetry or periodic behavior.Some general forms of graphs in polar coordinates include the following:Equation of a Circle (Centered at the Pole):A graph where the radius remains constant for all angles traces a circle centered at the pole:Equation of a...
153