Related Experiment Video
Updated: Dec 23, 2025

A Test Bed to Examine Helmet Fit and Retention and Biomechanical Measures of Head and Neck Injury in Simulated Impact
Published on: September 21, 2017
Kinematics of inboard-leaning occupants in frontal impacts
John-Paul Donlon1, Rachel Richardson1, Mohan Jayathirtha1
1Center for Applied Biomechanics, University of Virginia, Charlottesville, Virginia.
Abstract:
Objective: Up to one-half of drivers swerve before a crash, which may cause vehicle motions that displace an occupant from a normal seated position. How these altered postures affect occupant restraint in a crash is unknown. The goal of this study was to quantify the effect of an initial inboard lean on occupant kinematics in a frontal impact.Methods: 30 km/h frontal impact tests were performed with three postmortem human subjects (PMHS) seated in a neutral, upright posture and in a 20° inboard-leaning posture identified from simulated swerving tests with human volunteers.Results: In comparison to the upright posture, the inboard-leaning posture increased the initial distance from the D-ring to the belted shoulder by 105-156 mm. In the inboard-leaning tests, the occupant's head displaced 45-70 mm farther forward than in the upright tests and was also located 123-147 mm farther inboard at the time of maximum forward excursion. The peak resultant velocity of the occupant's head relative to the vehicle interior increased 1.40-1.54 m/s in the inboard-leaning tests.Conclusions: The posture-induced increase in the distance between the D-ring and the shoulder permitted the increased maximum forward head displacement and increased maximum head resultant velocity relative to the vehicle interior. Thus, an initial inboard lean in a frontal impact may increase the risk and severity of a head strike to the vehicle interior, and alter the location, timing, and nature of airbag engagement.
Related Concept Videos
Angular Momentum and Principle Axes of Inertia
To put this equation into simpler terms, it can be reconfigured using rectangular coordinates. This involves choosing an alternative set of XYZ axes that are arbitrarily inclined with respect to the reference frame. The process of deriving the rectangular...
Collisions in Multiple Dimensions: Problem Solving
A small car of mass 1,200 kg traveling east at 60 km/h collides at an intersection with a truck of mass 3,000 kg traveling due north at 40 km/h. The two vehicles are locked together. What is the...
Equation of Motion: General Plane motion
Moreover, the body's center of mass experiences a rotational effect as a result of these couple moments. This rotation can be articulated as the...
Impact
When particles with different initial velocities collide, they induce deformation by applying equal and opposite impulses. At the point of maximum deformation, the particles move together with...
Normal and Tangetial Components: Problem Solving
Kinematic Equations - III
Using the kinematic equations,...

