Graphene oxide orientated by a magnetic field and application in sensitive detection of chemical oxygen demand

An upright GO (UGO) modified screen-printed electrode was prepared with the help of the external magnetic field for improving its electrochemical performance. The ratio of GO: Nafion and the magnetic field intensity on the properties of UGO were examined by scanning electron microscope, cyclic voltammetry and electrochemical impedance spectroscopy. The magnetic field intensity does not influence the electron transfer kinetics but increase the number of active sites and therefore enhance the electroactive surface area. In addition, the UGO electrode that was electrodeposited Ni nanoparticles (denotes as Ni NPs/UGO modified electrode) display excellent oxidation towards glycine using chronoamperometry. The Ni NPs/UGO modified electrode indicated an excellent performance for electrochemical COD (chemical oxide demand) analysis with a linear detection range of 0.1-400 mg/L and a lower detection limit of 0.02 mg/L. Moreover, this Ni NPs/UGO modified electrode can be applied to the rapid determination of COD in general real water samples. The results were in agreement with those obtained by using the standard method (ISO 6060).