Comparison between an electrochemical reactor with and without membrane for the nor oxidation using novel ceramic...

The electrochemical oxidation of the antibiotic Norfloxacin (NOR) in chloride media on different anodic materials was studied at two different electrochemical reactors. The results were compared with those obtained in sulphate media. The anodes under study were a commercial boron-doped diamond (BBD) and two different ceramic electrodes based on tin oxide doped with antimony oxide in the presence (CuO) and absence (BCE) of copper oxide as sintering aid. The reactors employed were a one-compartment reactor (OCR) and a two-compartment one with a membrane separating both electrodes (EMR). The use of the membrane clearly enhanced both NOR degradation and TOC mineralization for all the anodic materials studied since some parallel reactions were avoided. Additionally, two different pathways for NOR oxidation were observed as a function of the reactor employed. The EMR also favoured the ionic by-products generation and the electrolyte dechlorination. NO₃^- increased with the oxidation power of the anode employed and it was also enhanced by the EMR use. Chloride media favours ceramic electrodes performance independently of the reactor employed as they did not generate an excess of oxidants as BDD did. The BCE electrode is an interesting alternative to BDD since although its oxidative power was lower, it presented similar current efficiency with lower energy consumption.