Related Experiment Video
Updated: Dec 16, 2025

Ambient Method for the Production of an Ionically Gated Carbon Nanotube Common Cathode in Tandem Organic Solar Cells
Published on: November 5, 2014
Characterization of Bilayer Organic Solar Cells with Carbon Nanotubes Using Impedance Analysis
Kyeongman Han1, So-Yeon Jun1, Hyuna Lim1
1Department of Physics, Sungkyunkwan University, Suwon 16419, Korea.
Abstract:
Four organic solar cell (OSC) devices with the bilayer heterojunction architecture were investigated, where carbon nanotubes (CNTs) were doped within the acceptor layer. The power conversion efficiency (PCE) of the CNT-incorporated device with a concentration of 0.004 wt% is approximately 20% point higher than that of the reference one. As the concentration of CNTs became higher, the PCE of the devices deteriorated; this could be caused by the percolative connection of CNTs within the layer. The voltage dependence on the effective lifetime of the charge carriers, determined by Cole-Cole curves of the impedance analysis, was different for the reference and CNT-incorporating devices-the lifetime of the CNT-incorporated ones was shorter, possibly owing to the high local electric field near the CNTs. Controlling the concentration of CNTs below the critical concentration of percolation is a key factor in achieving high photovoltaic performance.
More Related Videos
08:59Concurrent Quantitative Conductivity and Mechanical Properties Measurements of Organic Photovoltaic Materials using AFM
Published on: January 23, 2013
08:29Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
Published on: January 10, 2017