Related Experiment Video
Updated: Dec 14, 2025

Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
Crystallized Monolayer Semiconductor for Ohmic Contact Resistance, High Intrinsic Gain, and High Current Density
Boyu Peng1, Ke Cao2, Albert Ho Yuen Lau1
1Department of Mechanical Engineering, The University of Hong Kong, Pokfulam Road, Hong Kong.
Abstract:
The contact resistance limits the downscaling and operating range of organic field-effect transistors (OFETs). Access resistance through multilayers of molecules and the nonideal metal/semiconductor interface are two major bottlenecks preventing the lowering of the contact resistance. In this work, monolayer (1L) organic crystals and nondestructive electrodes are utilized to overcome the abovementioned challenges. High intrinsic mobility of 12.5 cm2 V-1 s-1 and Ohmic contact resistance of 40 Ω cm are achieved. Unlike the thermionic emission in common Schottky contacts, the carriers are predominantly injected by field emission. The 1L-OFETs can operate linearly from VDS = -1 V to VDS as small as -0.1 mV. Thanks to the good pinch-off behavior brought by the monolayer semiconductor, the 1L-OFETs show high intrinsic gain at the saturation regime. At a high bias load, a maximum current density of 4.2 µA µm-1 is achieved by the only molecular layer as the active channel, with a current saturation effect being observed. In addition to the low contact resistance and high-resolution lithography, it is suggested that the thermal management of high-mobility OFETs will be the next major challenge in achieving high-speed densely integrated flexible electronics.
Related Concept Videos
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Types of Semiconductors
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Schottky Barrier Diode
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...

