3D-printed bolus improves dose distribution for veterinary patients treated with photon beam radiation therapy

Commercial bolus is frequently used to increase dose at the patient's surface for superficial radiotherapy; however, uneven surfaces can create air gaps and discrepancies between prescribed and delivered dose. The purpose of this study was to determine if a customizable, 3D-printed bolus would improve dosimetry compared with a commercial bolus. For each patient, a planned bolus was generated within planning software, then created with 3D-printing. The treatment plan was recalculated with each bolus in situ. When evaluating tumor volumes at prescription, the 3D-printed bolus was closer to prescription compared to the commercial bolus. There was a significant difference in air gaps in patients receiving radiotherapy to the head (P < 0.001) but the difference was not significant for air gaps in caudal body sites (P = 0.05). Overall, the 3D-printed bolus resulted in reduced air gaps, dosimetry closer to prescription, and should be considered for superficial treatment areas of high irregularity.