Optimization of milling condition of composite resin blocks for CAD/CAM to improve surface roughness and flexural...

This study aims to elucidate the relationships between the flexural strength and surface topography of composite resin blocks, utilized for the CAD/CAM system, after milling in various step-over amounts. The rectangular specimens were milled from CAD/CAM blocks with step-over amount 0.01, 0.02, 0.05, 0.1, and 0.2 mm; further, a three-point bending test was conducted to reveal the flexural strength. The surface morphology after milling was assessed by a 3D laser microscope. The surface roughness significantly decreased by reducing the step-over amount. Although there was significant association between the surface roughness and flexural strength by the Pearson correlation, the 95% confidence intervals of the flexural strength were between the mirror-polished and sand-blasted groups. These results suggest that a precise step-over amount enables us to obtain a smooth surface. Furthermore, the flexural strength of the rough surface milled by a large step-over amount caused no damage to the composite resin for CAD/CAM crown.