Characterization of performance of multihole nozzle in cryospray

Present study deals with improvement in conventional technique of spraying liquid nitrogen on cancerous lesions to improve its efficacy. It is an attempt to demarcate the variation in outcome when cryogen is sprayed through customised multi-hole nozzle (MHN). Influence of mass flow rate on cryoablation while varying the number of holes in MHNs is analysed experimentally. Another section of study focuses on the impact of the rate of evaporation of cryogen when margin among the holes is changed. Total 6 MHNs are fabricated while changing their geometrical parameters. Single freeze-thaw cycle is carried out to spray liquid nitrogen on tissue mimicking gel with a spraying distance of 18 mm. Temperature profile captured through infrared images advocates that lethal area formed through the application of MHNs with 5 holes is larger than MHNs with 4 holes on the surface of gel. It reflects the influence of central hole on necrosis. In order to necrotize lesion through freezing, the most desired cooling rate (CR) varies from 50^∘C/min to 200^∘C/min. It is achieved up to a depth of 2 mm below the gel surface and in a radius of 10 mm from the centre of spray (CS) for all MHNs, except 4C. Most optimised margin in terms of cryoablation is also estimated in the study. MHN with 1.5 mm margin provides the most optimised results in terms of cryoablation when MHNs with the central hole are considered while MHN with 1 mm margin provides most optimised result when MHNs without central hole are considered. On the basis of observations made through thermal images it can be said that multiple freezing fronts are not observed on the gel surface which aids in the formation of lone giant ice ball. This provides an extra edge to the treatment methodology because alteration in the dimensions of necrotic zone can be made by changing the duration of spray. Larger lateral spread of necrotic zone will also reduce the number of sittings required for the treatment of larger lesions.