Elemental sulfur-driven sulfidogenic process under highly acidic conditions for sulfate-rich acid mine drainage...

Elemental sulfur-driven sulfidogenic process has been demonstrated to be more economical and energy-efficient than sulfate-driven sulfidogenic process when treating metal-laden wastewater. In previous studies, we observed that the polysulfide-involved indirect sulfur reduction ensured the superiority of sulfur over sulfate as the electron acceptor in the sulfidogenic process under neutral or weak-alkaline conditions. However, realizing high-rate sulfur reduction process for acid mine drainage (AMD) treatment without pH amelioration is still a great challenge because polysulfide cannot exist under acidic conditions. In this study, a laboratory-scale sulfur-packed bed reactor was therefore continuously operated with a constant sulfate concentration (~1300 mg S/L) and decreasing pH from 7.3 to 2.1. After 400 days of operation, a stable sulfide production rate (38.2 ± 7.6 mg S/L) was achieved under highly acidic conditions (pH 2.6-3.5), which is significantly higher than those reported in sulfate reduction under similar conditions. In the presence of high sulfate content, elemental sulfur reduction could dominate over sulfate reduction under neutral and acidic conditions, especially when the pH ≥ 6.5 or ≤ 3.5. The decreasing pH significantly reduced the diversity of microbial community, but did not substantially influence the abundance of functional genes associated with organic and sulfur metabolisms. The predominant sulfur-reducing genera shifted from Desulfomicrobium under neutral conditions to Desulfurella under highly acidic conditions. The high-rate sulfur reduction under acidic conditions could be attributed to the combined results of high abundance of Desulfurella and low abundance of sulfate-reducing bacteria (SRB). Accordingly, sulfur reduction process can be developed to achieve efficient and economical treatment of AMD under highly acidic conditions (pH ≤ 3.5).