Evaluation of four-dimensional cone beam computed tomography ventilation images acquired with two different linear...

We evaluated four-dimensional cone beam computed tomography (4D-CBCT) ventilation images (VI_CBCT) acquired with two different linear accelerator systems at various gantry speeds using a deformable lung phantom. The 4D-CT and 4D-CBCT scans were performed using a computed tomography (CT) scanner, an X-ray volume imaging system (Elekta XVI) mounted in Versa HD, and an On-Board Imager (OBI) system mounted in TrueBeam. Intensity-based deformable image registration (DIR) was performed between peak-exhale and peak-inhale images. VI_CBCT- and 4D-CT-based ventilation images (VI_CT) were derived by DIR using two metrics: one based on the Jacobian determinant and one on changes in the Hounsfield unit (HU). Three different DIR regularization values (λ) were used for VI_CBCT. Correlations between the VI_CBCT and VI_CT values were evaluated using voxel-wise Spearman's rank correlation coefficient (r). In case of both metrics, the Jacobian-based VI_CBCT with a gantry speed of 0.6 deg/sec in Versa HD showed the highest correlation for all the gantry speeds (e.g., λ = 0.05 and r = 0.68). Thus, the r value of the Jacobian-based VI_CBCT was greater or equal to that of the HU-based VI_CBCT. In addition, the ventilation accuracy of VI_CBCT increased at low gantry speeds. Thus, the image quality of VI_CBCT was affected by the change in gantry speed in both the imaging systems. Additionally, DIR regularization considerably influenced VI_CBCT in both the imaging systems. Our results have the potential to assist in designing CBCT protocols, incorporating VI_CBCT imaging into the functional avoidance planning process.