Wear Behaviour of ZA27/SiC/Graphite Composites under Lubricated Sliding Conditions

The composites samples based on ZA27 alloy were subjected to tribological tests and the observed results are presented in this paper. The samples (ZA27/5%SiC and ZA27/5%SiC/5%Gr) were obtained by compo-casting technique. Their wear behaviour was compared to the base alloy. The wear tests were done by using a block-on-disc tribometer under lubricated sliding conditions. Tribological investigation were conducted for three normal loads (40 N, 80 N, and 120 N), three sliding speeds (0.25 m/s, 0.5 m/s, and 1 m/s), and sliding distance of 1200 m. The tested materials were analysed by the scanning electronic microscope (SEM) and the energy dispersive spectrometry (EDS). The presence of oil lubricant improved the wear resistance and friction behaviour of both composites and base alloy. The tested composites show much higher wear resistance than the corresponding matrix material. It was established that the ZA27/5%SiC/5%Gr hybrid composite has best tribological properties.