Related Experiment Video
Updated: Dec 10, 2025

Preparation of Graphene Liquid Cells for the Observation of Lithium-ion Battery Material
Published on: February 5, 2019
One-Pot Synthesis and High Electrochemical Performance of CuS/Cu1.8S Nanocomposites as Anodes for Lithium-Ion
Lin-Hui Wang1, Yan-Kun Dai2, Yu-Feng Qin1
1College of Information Science and Engineering, Shandong Agricultural University, Taian 271018, China.
Abstract:
CuS and Cu1.8S have been investigated respectively as anodes of lithium-ion batteries because of their abundant resources, no environment pollution, good electrical conductivity, and a stable discharge voltage plateau. In this work, CuS/Cu1.8S nanocomposites were firstly prepared simultaneously by the one-pot synthesis method at a relatively higher reaction temperature 200 °C. The CuS/Cu1.8S nanocomposites anodes exhibited a high initial discharge capacity, an excellent reversible rate capability, and remarkable cycle stability at a high current density, which could be due to the nano-size of the CuS/Cu1.8S nanocomposites and the assistance of Cu1.8S. The high electrochemical performance of the CuS/Cu1.8S nanocomposites indicated that the CuxS nanomaterials will be a potential lithium-ion battery anode.
More Related Videos
09:58Solar-Driven Electrochemical Green Fuel Production from CO2 and Water Using Ti3C2Tx MXene-Supported CuZn and NiCo Catalysts
Published on: November 7, 2025
10:03Characterization of Electrode Materials for Lithium Ion and Sodium Ion Batteries Using Synchrotron Radiation Techniques
Published on: November 11, 2013