Related Experiment Video
Updated: Dec 10, 2025

Electric-field Control of Electronic States in WS2 Nanodevices by Electrolyte Gating
Published on: April 12, 2018
Channel Length-Dependent Operation of Ambipolar Schottky-Barrier Transistors on a Single Si Nanowire
So Jeong Park1,2,3, Dae-Young Jeon1,2,4, Violetta Sessi1,2
1Chair of Nanoelectronic Materials, TU Dresden, Noethnitzer Strasse 64, 01187 Dresden, Germany.
Abstract:
For use in flexible, printable, wearable electronics, Schottky-barrier field-effect transistors (SB-FETs) with various channel materials including low-dimensional nanomaterials have been considered so far due to their comparatively simple and cost-effective integration scheme free of junction and channel dopants. However, the electric conduction mechanism and the scaling properties underlying their performance differ significantly from those of conventional metal-oxide-semiconductor (MOS) field-effect transistors. Indeed, an understanding of channel length scaling and drain bias impact has not been elucidated sufficiently. Here, multiple ambipolar SB-FETs with different channel lengths have been fabricated on a single silicon nanowire ensuring a constant nanowire diameter. Their length scaling behavior is analyzed through drain current and transconductance contour maps, each depending on the drain and gate bias. The reduced gate control and extended drain field effect on Schottky junctions were observed in short channels. Activation energy measurements showed lower sensitive behavior of the Schottky barrier to gate bias in the short-channel device and confirmed the thinning of Schottky barrier width for electrons at the source interface with drain bias.
More Related Videos
Related Concept Videos
Schottky Barrier Diode
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
P-N junction

