Novel adaptive impedance control for exoskeleton robot for rehabilitation using a nonlinear time-delay disturbance...

A new adaptive impedance, augmented with backstepping control, time-delay estimation, and a disturbance observer, was designed to perform passive-assistive rehabilitation motion. This was done using a rehabilitation robot whereby humans' musculoskeletal conditions were considered. This control scheme aimed to mimic the movement behavior of the user and to provide an accurate compensation for uncertainties and torque disturbances. Such disturbances were excited by constraints of input saturation of the robot's actuators, friction forces and backlash, several payloads of the attached upper-limb of each patient, and time delay errors. The designed impedance control algorithm would transfer the stiffness of the human upper limb to the developed impedance model via the measured user force. In the proposed control scheme, active rejection of disturbances would be achieved through the direct connection between such disturbances from the observer's output and the control input via the feedforward loop of the system. Furthermore, the computed control input does not require any precise knowledge of the robot's dynamic model or any knowledge of built-in torque-sensing units to provide the desirable physiotherapy treatment. Experimental investigations performed by two subjects were exhibited to support the benefits of the designed approach.