Related Experiment Video
Updated: Dec 9, 2025

Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
Single mode operation and ultrawide tuning of on-chip optofluidic dye lasers
Lin Chen1, Chenming Zhao1, Liying Liu1
1Key Lab for Micro and Nanophotonic Structures (Ministry of Education, China), Department of Optical Science and Engineering, School of Information Science and Engineering, Fudan University, Shanghai 200433, China. lyliu@fudan.edu.cn lei_xu@fudan.edu.cn.
Abstract:
Single transverse mode lasers that can be continuously tuned over ultrawide wavelength ranges with a narrow linewidth are very important components for lab-on-a-chip systems. Such lasers that can be tuned over the whole visible spectrum or even beyond have not been demonstrated hitherto regardless of many years of research in this area. This article presents an on-chip optofluidic distributed Bragg reflector (DBR) dye laser constituted by a combination of a T-shaped optofluidic waveguide (T waveguide) and two ridge-waveguide-based fluidic DBR gratings, in which the T waveguide provides gain for lasing and the DBR gratings select the lasing wavelength. This configuration guarantees that the fundamental mode has a much lower loss (consequently much lower lasing threshold) than all the higher order modes. By fabricating PDMS devices of such structure and changing the fluid in DBR gratings as well as the gain fluid in the T waveguide, we demonstrate a single mode optofluidic dye laser that can be continuously tuned over a wavelength range of more than 450 nm with a linewidth less than 0.1 nm. Mode patterns obtained when using different laser dyes in the T waveguide verify fundamental mode operation over the wide wavelength range.

