Wood-Based Solar Interface Evaporation Device with Self-Desalting and High Antibacterial Activity for Efficient Solar...

The main challenges of a solar steam generation device based on biomass materials are complicated processing techniques and relatively low efficiency. To solve these problems, we reported a simple immersion treatment method by depositing polydopamine (PDA) and silver nanoparticles (AgNPs) on natural wood to prepare a novel solar interface evaporation device. Ag-PDA@wood exhibits a unique bilayer structure. The absorbance of the top light absorption layer is higher than 96% in a wide wavelength range (300-2500 nm). Owing to the synergistic photothermal effect between PDA and AgNPs, Ag-PDA@wood has ultrafast solar-thermal response (a temperature increase of 42.5 °C within 5 min under 1 sun), and more heat is located at the steam generation interface (the surface temperature is 45.1 °C). The natural wood layer at the bottom with low thermal conductivity provides sufficient water supply and reduces the bulk heat loss. A high evaporation rate of 1.58 kg m^-2 h^-1 is achieved using Ag-PDA@wood under 1 sun (1 kW m^-2). Its evaporation efficiency reaches 88.6%. The results upon sewage treatment and seawater desalination indicate that Ag-PDA@wood has an excellent purification ability and self-desalting capacity. More importantly, when compared to traditional solar evaporators, Ag-PDA@wood exhibits high antibacterial activity. The result of this antibacterial experiment shows that this material almost completely kills harmful bacteria. Therefore, Ag-PDA@wood has a high application potential in seawater desalination and sewage purification, providing a significant incentive to solve the problem of insufficient freshwater supply.