Related Experiment Video
Updated: Dec 6, 2025

Assessing Cerebral Autoregulation via Oscillatory Lower Body Negative Pressure and Projection Pursuit Regression
Published on: December 10, 2014
Blood pressure measurement by coupling an external pressure and photo-plethysmographic signals
Abstract:
This work presents a new technique for the noninvasive measurement of systolic blood pressure (sBP), mean blood pressure (mBP) and diastolic blood pressure (dBP) using photo-plethysmographic (PPG) sensors when an artery is exposed to an external pressure. Two sets of experiments were performed: a first study combining PPG with an oscillometric device and the second combining PPG with a force/pressure sensor. These two experiments enable the estimation of BP values. PPG results were found to be comparable to oscillometric results, with bias and precision errors of -0.81 and 5.26 for sBP, 1.12 and 5.61 for mBP and 1.67 and 9.09 for dBP (n = 28). Furthermore, amplification over the brachial-to-finger path was found to be 1.02 ± 0.08 for mBP (n = 20) confirming that mBP does not undergo any amplification along the arterial tree whereas, for sBP, an amplification of 1.20 ± 0.12 (n = 7) was found for green wavelength, 1.35 ± 0.09 (n = 6) for red wavelength and 1.36 ± 0.09 (n = 6) for infrared wavelength. Thus, amplification for sBP is bigger for red and infrared wavelengths compared to green one.
Related Concept Videos
Measurement of Blood Pressure
Equipments Used To Measure Blood Pressure
This invasive approach involves cannulating a peripheral artery. During each cardiac contraction, pressure generates mechanical motion within the catheter, transmitted through rigid, fluid-filled tubing to a transducer. This transducer converts mechanical motion into electrical signals displayed as waveforms on a monitor. An automatic flushing system prevents blood backflow. Due to the potential risk of unexpected arterial blood loss, this method is primarily used in intensive...
Sites for measruring blood pressure
The Brachial Artery: Primary Site for Blood Pressure Measurement
Special considerations while measuring blood pressure
Monitoring Both Arms:
Monitoring BP in both arms during the initial assessment is advisable, as the systolic value may differ by five to ten mm Hg between arms. For subsequent BP assessments, use the arm with the higher reading.
Assessment of blood pressure in brachial artery(two-step method)
Assessing Blood pressure using a doppler ultrasound
Pre-Procedural Guidelines for Doppler Ultrasound Blood Pressure Assessment:
Preparation of Equipment:

