Related Experiment Video
Updated: Aug 9, 2026

Preparation and Use of Photocatalytically Active Segmented Ag|ZnO and Coaxial TiO2-Ag Nanowires Made by Templated Electrodeposition
Published on: May 2, 2014
Enhanced chlorine evolution from dimensionally stable anode by heterojunction with Ti and Bi based mixed metal oxide
Sukhwa Hong1, Tai-Kyu Lee2, Michael R Hoffmann3
1Division of Environmental Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang 790-784, Republic of Korea.
Abstract:
This study reports enhanced current (CERCS) and energy efficiency (EERCS) of reactive chlorine species (RCS) generation on Ir7Ta3Oy anode by Ti/Bi mixed metal oxide heterojunction layers despite reductions in pseudo-capacitance and film conductivity. In potentiostatic electrolysis of 50 mM NaCl solutions, dramatic improvement (0.61 mmol cm-2 hr-1 at 2.5 V NHE) was noted by simple coating of thin (~2 μm) TiO2 layer from ball-milled TiO2 nanoparticle (80-100 nm) suspension, even with moderate elevation in voltammetric wave. Decoration of Bi2O3 particles (1 - 2 μm) showed limited or adverse effects for RCS generation and stability. However, Bi-doped TiO2 layers prepared from polyol-mediated or co-precipitation methods marked the highest CERCS (~100%) and EERCS (8.16 mmol Wh-1 at 2.5 V NHE) by increased mixing level and effective shift in surface charge. Surface ·OH exclusively mediated the RCS generation whose further transformation to higher oxide could be restrained by the heterojunction layer.

