Related Experiment Video
Updated: Dec 6, 2025

Building a Simple and Versatile Illumination System for Optogenetic Experiments
Published on: January 12, 2021
Experimental Characterization of RGB LED Transceiver in Low-Complexity LED-to-LED Link
Mariam Galal1,2, Wai Pang Ng1, Richard Binns1
1Faculty of Engineering and Environment, Northumbria University, Newcastle upon Tyne NE1 8ST, UK.
Abstract:
This paper proposes a low-complexity and energy-efficient light emitting diode (LED)-to-LED communication system for Internet of Things (IoT) devices with data rates up to 200 kbps over an error-free transmission distance up to 7 cm. The system is based on off-the-shelf red-green-blue (RGB) LEDs, of which the red sub-LED is employed as photodetector in photovoltaic mode while the green sub-LED is the transmitter. The LED photodetector is characterized in the terms of its noise characteristics and its response to the light intensity. The system performance is then analysed in terms of bandwidth, bit error rate (BER) and the signal to noise ratio (SNR). A matched filter is proposed, which optimises the performance and increases the error-free distance.
More Related Videos
10:42In Depth Analyses of LEDs by a Combination of X-ray Computed Tomography CT and Light Microscopy LM Correlated with Scanning Electron Microscopy SEM
Published on: June 16, 2016
10:41Enhanced Electron Injection and Exciton Confinement for Pure Blue Quantum-Dot Light-Emitting Diodes by Introducing Partially Oxidized Aluminum Cathode
Published on: May 31, 2018