Related Experiment Video
Updated: Dec 5, 2025

Determining Viral Disinfection Efficacy of Hot Water Laundering
Published on: June 21, 2022
Coronavirus Persistence on a Plastic Carrier Under Refrigeration Conditions and Its Reduction Using Wet Wiping
1Collection of Animal Pathogenic Microorganisms, Veterinary Research Institute, Hudcova 70, 621 00, Brno, Czech Republic. malenovska@vri.cz.
Abstract:
The global SARS-CoV-2 pandemic dictates that anti-contagion strategies should become matters of essential routine in everyday life. Fomite transference is one of the routes of transmission that has been considered for this virus. However, the risks associated with contaminated surfaces of food packaging kept in refrigerators have not yet been adequately assessed. In this study, a surrogate virus, Alphacoronavirus 1, was used to investigate the persistence of coronavirus dried on a plastic carrier at 4 °C. Techniques of wet wiping, with or without disinfectant saturation, were employed to evaluate their effectiveness in the elimination of the virus. If not wiped, the loss of infectivity of the virus on plastic surfaces was, on average, 0.93 log10 (i.e. 83%) per day of storage at 4 °C. Wiping with water-saturated material reduced the initial virus titre on the plastic carrier by 2.4 log10 (99.6%); the same results were achieved through wiping with bactericidal wipes containing ethanol. Wipes saturated with a combination of disinfectant agents (didecyl-dimethyl-ammonium chloride, hydrogen peroxide) decreased the virus titre still more efficiently, by 3.8 log10 (99.98%) and also significantly prevented further transfer of the virus to a secondary surface through wiping. Thus SARS-CoV-2 transmission potential via contaminated plastic packaging and food may be efficiently eliminated by wet-wiping, especially when wipes saturated with specific disinfectants are used.
Related Concept Videos
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Physical Methods for Controlling Microbial Growth: Temperature
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Key Techniques in Microbiology
Methods for Controlling Microbial Growth
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...

